OFI Testing Equipment, Inc.

11302 Steeplecrest Dr.
Houston,  TX  77065

United States
http://www.ofite.com
  • Booth: 852


OFITE - Dependable Products from People You Trust®!

Since 1982, OFI Testing Equipment (OFITE) has designed instruments and reagents for testing drilling fluids, frac fluids, oil well cements, core samples, and wastewater. From our manufacturing center in Houston, Texas, we support businesses worldwide with top quality products, extensive repair services, and custom engineering solutions.


 Products

  • Model 2040 Automated HTHP Consistometer
    The Model 2040 Automated HTHP Consistometer measures the thickening time of well cements under simulated down hole conditions. It offers computerized Data Acquisition and Control, automated temperature and pressure control, and a variable speed motor....

  • The Model 2040 Automated HTHP Consistometer was specifically engineered to determine the thickening time of well cements under simulated down-hole pressures and temperatures. The Model 2040 offers a computerized Data Acquisition and Control system, automatic temperature and pressure control, and a variable speed motor all standard in one easy-to-use unit.

    Features

    • Small footprint, our new and slim design saves valuable lab space
    • Automatic temperature and pressure control, variable speed motor (0 - 150 RPM) powered by a magnetic drive
    • Oil Reservoir, features a cap with built-in funnel to help prevent spills, a removable top and bottom that makes cleaning easy, and a sloping bottom that collects sediment for easy removal
    • Windows® based, Computerized Data Acquisition and Control system, provides detailed test information in convenient formats, and can control multiple units from one computer via RS-232 or Ethernet connection
    • Safety Features, temperature, pressure, and consistency alarms
    • Status indicator, symbolizes (3) selectable ranges of consistency
    • Conforms to API Specification 10 guidelines

    Specifications

    • Maximum Pressure: 40,000 PSI (275.8 MPa)
    • Maximum Temperature: 600°F (315.6°C)
    • Consistency Range: (0 - 125 Bc)
    • Digital Temperature Controller with 0.1° resolution
    • Pressure indicator resolution is 100 PSI and includes both high- and low-pressure alarms
    • Slurry cup rotational speed is variable up to 150 RPM
  • TLF-112 Triaxial Mechanical Properties Tester
    The TLF-112 Triaxial Mechanical Properties Testing System is the first instrument specially designed to measure the mechanical properties of oilwell cement. It can measure compressive strength, Young’s modulus, Poisson’s ratio, and tensile strength....

  • The TLF-112 Triaxial Mechanical Properties Testing System is the first unit on the market specially designed to measure the mechanical properties of oilwell cement. It has the ability to measure compressive strength, Young’s modulus, Poisson’s ratio, and tensile strength of cement samples under in-situ conditions.

    Features

    • Physically measures the mechanical properties of set cement:
    • Compressive Strength (API Spec 10A and RP 10B2)
    • Young’s modulus and Poisson’s ratio
    • Brazilian Splitting Tensile Strength (ASTM C496/C496M -04)
    • Temperature control up to 400°F (204.4°C) and confining pressure control up to 10,000 PSI (68.95 MPa) are available to simulate down-hole conditions with either oil or water as a pressure medium
    • Accommodates cube samples up to 2.0" × 2.0" and cylindrical samples up to 2.0" in diameter and 5.0" in length
    • Utilizes digital servo-controlled pressure and load for improved accuracy and stability
    • Single, self-contained unit with a small footprint to save valuable floor space
    • Windows®-based system control and data acquisition

    Specifications

    • Load Frame Capacity: 112,400 lb (500 kN)
    • Stroke: 4" (100 mm)
    • Maximum Temperature: 400°F (204.4°C)
    • Maximum Pressure: 10,000 PSI (69.0 MPa)
  • Multi Unit Retort, 50 mL
    The Multi Unit Retort is five 50 mL Retort units into a single case. Each unit has a separate electronic temperature controller for accurate, reliable, and reproducible testing. The included software graphs the temperature over time for each station....

  • The Retort provides a method for measuring the percentage (%) of oil and water, and for estimating both suspended and dissolved solids contained in a sample of water-based or oil-based muds and cuttings. Knowledge of oil, water, and solid content is fundamental to proper control of mud properties when considering oil/water ratios, rheology, density, filtration, and salinity. Knowledge of solids in drilling fluids is essential to evaluation of viscosity control and solids control equipment.

    The Multi Unit Retort incorporates five (5) 50 mL Retort units into a single instrument. Each Retort has a separate electronic temperature controller to provide accurate, reliable, and reproducible testing. The included software graphs the temperature over time for each of the five stations.

    Features

    • Five 50 mL Retorts in a single instrument
    • Multi-unit design saves valuable bench space
    • Individual electronic temperature control improves accuracy and reliability
    • Digital temperature display
    • Included software graphs temperature over time for each Retort

    Specifications

    • Maximum Temperature: 1,000°F (537°C)
    • Cell Capacity: 50 mL
    • Heating Capacity: 500 Watts Per Station (2,500 Watts total)

Send Email

Type your information and click "Send Email" to send an email to this exhibitor. To return to the previous screen without saving, click "Reset".


 
Please contact spe.events@spe.org for any questions.
For technical assistance please contact: Support@a2zinc.net
Title